ULVAC爱发科 双动式真空角阀 VLPｰU20 双作用气缸型
ULVAC爱发科 双动式真空角阀 VLPｰU20 双作用气缸型 ULVAC爱发科 双动式真空角阀 VLPｰU20 双作用气缸型 ULVAC的真空阀是基于ULVAC在真空领域丰富的技术和经验开发的。从大气压到极高真空，对应广泛的需求提供丰富的系列产品。特点SUS角阀可以烘烤至150℃。连接法兰有4种类型可选择：JIS-VF，ISO-KF，ISO-K和ISO-CF。提供单动式和复动式2
- 型号： VLPｰU20
ULVAC爱发科 双动式真空角阀 VLPｰU20 双作用气缸型
ULVAC爱发科 双动式真空角阀 VLPｰU20 双作用气缸型
ULVAC的真空阀是基于ULVAC在真空领域丰富的技术和经验开发的。
从大气压到极高真空，对应广泛的需求提供丰富的系列产品。
从大气压到极高真空，对应广泛的需求提供丰富的系列产品。
特点
SUS角阀可以烘烤至150℃。
连接法兰有4种类型可选择：JIS-VF，ISO-KF，ISO-K和ISO-CF。
提供单动式和复动式2种。 单动式仅需要一个气动管线。
不锈钢材料。 （但是，VLP-U由铁制成，VAP，VAH和VFR由铝制成。）
规格
| Model | VLP-U |
| Maximum allowable differential pressure on valve plate (Positive pressure) MPa | 0.10 |
| Maximum allowable differential pressure on valve plate （Counter pressure） n/a | Not available |
| Maximum allowable differential pressure in opening direction （Positive pressure） kPa | 1.0 |
| Maximum allowable differential pressure in opening direction （Counter pressure） n/a | Not available |
| Plate seal | O-ring |
| Feedthrough | O-ring |
| Actuation | Double-acting cylinder |
| External leak rate*1 Pa・m3/s | ≦1.3E-7 |
| Internal leak rate*1 Pa・m3/s | ≦1.3E-7 |
| Operating pressure range（absolute pressure） Pa | Atm.～1.0E-5 |
| Bakeout temperature(when stopping)*2 ℃ | 60 |
| Operating ambient temperature ℃ | 5～40 |
| Fluid temperature ℃ | 5～40 |
| Heating & cooling speed ℃/h | ≦30 |
| Operating ambient | Non-corrosive |
| Fluid | Non-corrosive |
| Compressed air to cylinder MPaG | 0.40～0.55 |
| Warranted operation cycle*3 | 100,000 |
| Orientation | Vertical |
| Position indicator | Optional (sell separately) |
| Material of major parts (Vacuum side) | Steel 400 with Ni plating |
| Material of major parts (Atmosphere side) | Steel 400 with Ni plating + acrylic painting |
| Seal material (Vacuum side) | Nitrile rubber |
| Grease (Vacuum side) | Highly purified paraffin oil |
| Attachment for lifting | None/td> |
| RoHS | Complied |
■Detail of specification VLP-U
| Flange | VF500 |
| Conductance in opening position*4 L/s | 9,198 |
| Cylinder capacity cc | 9,040 |
| Compressed air fitting | Rc3/4 |
| Operating speed (open) *5 sec | 7.0±0.5 |
| Operating speed (close) *5 sec | 7.0±0.5 |
| Weight kg | 310 |
| Height dimension (A) mm | 1,530 |
| Center-to-flange dimension (B) mm | 380 |
*1 Leak rate does not include permeation in O-ring. External leak during opening and closing is not regulated in the case of O-ring shaft seal feedthrough.
*2 Do not open and close during bakeout.
*3 See instruction manual for detail.
*4 Conductance is based on molecular flow at 20℃ (68F) air.
*5 Adjust operation speed to make its value equal to specified value by using a speed controller.